MON – FRI
10:00am – 16:00pm
SAT – SUN
CLOSED
SHOP NOW - All Product Categories Here
The motion detector alarm is a complete, self-contained alarm system, ideal for use in the home, kitchen, room, shed, garage, caravan or boat.
It's time to get busy with the housework and the child sneaks out of the house. You can get a good reminder with the alarm.
If you are asleep at night, the 125 dB sound can deter burglars when they come to your home. Ideal for people living alone and the elderly.
Emergency alarm button for the elderly. When you press the panic button on the remote control, the alarm is triggered immediately. Give you and your family help in critical moments.
Prevent pets from running around. Or stealing something from the table.
Press the ON/OFF button, you will hear a short beep and the red identification light on the front will light up once.
Briefly press the Arm button to arm the device. The device is automatically armed after 3 seconds.
The detector sounds the alarm when people pass by.
Briefly press the disarm button to disarm.
Once the alarm system for the house has been triggered, does it switch off automatically after a certain time?
The system has a door chime and an alarm function. The door chime only sounds once, the alarm continues to sound and you must use the remote control or approach the alarm to switch it off.
The device does not go into connection mode when the connection button or the sound button is pressed.
The unit could be switched off. Press and hold the On/Off button to switch the unit on. Now press and hold the connection button or the sound button to enter connection mode.
When the button is pressed, the light on the remote control lights up, but the device does not respond.
Please check the batteries. These could be exhausted.
The unit detects movements when no one is in the detection area (false alarm).
The CP2 PIR motion detector alarm is activated by infrared light. It can also be activated by direct sunlight, for example. Do not install the alarm in direct sunlight.
How long does it take for the PIR motion detector alarm to be set up?
About 30 seconds or so.
| Colour | Alarm-black |
| Brand | ATUTEN |
| Power source | Battery Powered |
| Battery description | Alkaline |
| Number of batteries | 3 AAA batteries required. (included) |
UK / Germany / Netherlands / Italy / USA / China
10:00am – 16:00pm
CLOSED
















