DIY Doctor Waterproof Tape for Leaks - Butyl Roof Sealant Tape - Outdoor Waterproof Repair Tape with Aluminium Foil – 50mm x 5m

The DIY Doctor Butyl Seal Tape provides a mess-free solution to form a complete seal over leaks.

The adhesive is extremely sticky once applied to a clean surface.

It's waterproof and high temperature resistant and can be used at 5°F-113°F without cracking or melting.

Works professionally on roof leaks, window seals, awnings, gutters, pipes, boats, glass, outdoor equipment and much more.

.

Instruction for use:

• 1. Make sure the surface the tape is to be applied is clean and dry before application.
• 2. Cut the butyl seal tape into the size needed.
• 3. Peel off the film on the back of the tape.
• 4. Firmly press the butyl sealant until the tape is fully stuck with surface.

.

• Super Strong Adhesive: Once correctly applied, the butyl molecules blend into the working surface as one.
• Water Resistant Surface: Unlike many traditional putty tapes, our upgraded wear-resistant aluminium layer stops water from infiltrating into the working base.
• Thickened Aluminium Foil: Our thicker quilted design aluminium foil insulates against fire effectively and also resists melting even after prolonged use (incredible 30 years product life).
• UV Resistant Surface: The grid aluminium surface is designed specifically for outdoor exposure and will even efficiently reflect strong sunlight.

.

• PROFESSIONAL GRADE ALUMINIUM BACKED FLASHING TAPE - Cost effective, long lasting and versatile from a tape manufacturer you can trust.
• VERSATILE - Perfect for repairs all round the home like roof leaks, as a gutter sealant, windowsill leaks, tent repairs, metal or plastic pipes, toilet leaks. The list is endless.
• EASY TO INSTALL and mess-free Aluminium Foil Butyl Tape enables the average homeowner with little to no experience in repair to achieve professional results. Easy to manage and does not turn gooey. Flexible enough for use on curved surfaces.
• LONG LASTING - Designed to withstand temps of -15c to 45c this tape will last in the most demanding conditions. Sticks to nearly all clean, dry surfaces.
• EMERGENCY SEALANT TAPE: Can be applied on metal roof, galvanized metal, glass, plastic, and concrete. Gutters, down pipes, air vents, skylights, corrugated roofing, flat roofing, shed roof. Simply a must for any home. Will help with nearly all leaks around the home.

.

• The surface to be taped should be clean and dry. The tape will not adhere if the surfaces are not properly prepared.
• Dirty or wet surfaces should be completely cleaned with water, paper towels, dry rags or other materials which will prepare the surface for the tape.
• The product obtains optimum adhesion when the surfaces to be bonded are warm. Ideally the surfaces should be above 50-60°F to insure an acceptable bond. In order to obtain a bond at lower temperatures, external heat may be required.
• In cold weather, the tape can be pre-warmed on a heater and then press it in place with the help of hot air gun.
• After using tools such as scissors, knives, spatulas etc they can be cleaned with lacquer thinners. We recommend to WEAR DISPOSABLE GLOVES while working with butyl tape.